|
|
Post by Panther on Aug 18, 2015 9:25:01 GMT -5
Im trying to get the most accuracy out of my gun without changing my FPS. any ideas? I would rather not have to do alot of changes to the internals but I can if thats the best way. I also would like to find the cheapest way. thanks for the help.
|
|
|
|
Post by Maj. Victory on Aug 18, 2015 11:14:01 GMT -5
|
|
|
|
Post by Zinger on Aug 18, 2015 12:51:41 GMT -5
I'd agree. Madbull 6.03mm barrels are the best bang for your buck. I'd personally pair it with a KWA 2GX bucking and you'll be very happy with the results. My cousin runs that setup in an m4 with a 4in barrel and around 300fps with a .20g bb. Great range and surprisingly good accuracy with .25's. Bucking link (little pricy at $13, but oh so worth it, I've run one in every aeg I've owned): www.evike.com/products/31909/ |
|
|
|
Post by Panther on Aug 18, 2015 13:00:56 GMT -5
Thanks, I just looked at my warranty again and I don't want to void my warranty by opening it and breaking it because I don't know what I am doing.
|
|
|
|
Post by Maj. Victory on Aug 18, 2015 13:58:30 GMT -5
Thanks, I just looked at my warranty again and I don't want to void my warranty by opening it and breaking it because I don't know what I am doing. Just ask somebody there to put it in for ya, it literally takes like 45 seconds and as long as you have an older player do it there's almost no way you could brake it. |
|
|
|
Post by Panther on Aug 18, 2015 20:02:41 GMT -5
Thanks, I just looked at my warranty again and I don't want to void my warranty by opening it and breaking it because I don't know what I am doing. Just ask somebody there to put it in for ya, it literally takes like 45 seconds and as long as you have an older player do it there's almost no way you could brake it. Somebody at Kalamazoo airsoft? |
|
|
|
Post by Maj. Victory on Aug 18, 2015 20:34:48 GMT -5
Yeah one of the refs, someone at the front desk or an older player at Kalamazoo Airsoft.
|
|
|
|
Post by Panther on Aug 18, 2015 20:45:16 GMT -5
Ok, thanks for the help
|
|
darth
Sergeant
Posts: 256
|
Post by darth on Aug 19, 2015 10:59:35 GMT -5
I agree with everyone about the madbull tbb. They are really nice. I also have found that the g&g green hop up bucking is a really solid performer. I put one in almost every aeg I buy.
|
|
|
|
Post by Panther on Aug 19, 2015 18:06:22 GMT -5
I agree with everyone about the madbull tbb. They are really nice. I also have found that the g&g green hop up bucking is a really solid performer. I put one in almost every aeg I buy. Do you know if the bucking and the madbull Tbb will actually fit the A&k M4 S-system? |
|
|
|
Post by waterboy on Aug 19, 2015 20:17:44 GMT -5
There universal for aegs
|
|
darth
Sergeant
Posts: 256
|
Post by darth on Aug 21, 2015 6:42:20 GMT -5
Yeah most aegs use the same type barrel and bucking. Especially m4 platforms.
|
|
