|
|
Post by Chubbs on Oct 27, 2013 18:06:29 GMT -5
Personally I'd just remove the MBUS instead of 45 canting them. Then get a micro dot and mount it on top of the scope.
|
|
|
|
Post by Human (Ghost) on Oct 27, 2013 21:57:11 GMT -5
Good ideal but where would I find such a mount.
|
|
|
|
Post by Shadsquatch on Oct 28, 2013 7:40:19 GMT -5
You can get railed scope rings.
|
|
|
|
Post by Human (Ghost) on Oct 31, 2013 9:57:23 GMT -5
Thanks will look for them on line.
|
|
|
|
Post by Sleepy on Oct 31, 2013 11:39:55 GMT -5
What internals do you have inside that make it a dmr? I've been thinking of building one myself.
|
|
|
|
Post by Human (Ghost) on Oct 31, 2013 12:01:46 GMT -5
Cm16 r8-l stock is a pretty decent gun and have accuracy. It shots 330 Fps out the box after upgrading to a magbullblack python and magbull fishbone bucking. I get 350 fps and on target at 75-100 ft. Good range for cqb. 40-50 investment.
|
|
|
|
Post by Arch-Angel(3.14) on Dec 2, 2013 13:01:49 GMT -5
I took some bad photos.    VFC Mk18 MOD 1 YOLOrstar Internals: - Orga 363mm 6.23mm Widebore - ProWin hop-chamber - Namazu flat hop - Prometheus Bucking - Red Nozzle - Red Low-flow Poppet - Poppet Shims Externals: - functional Peq/mx3 w/ insight dual pressure switch - Magpul AFG - Magpul MOE stock - Repro 551 - Magpul MBUS - Amped Grip Line - Firebase rig - Amped Line - Suppressor (not foam filled  ) FCU and engine are fine-tuned and the latest revision. |
|
|
|
Post by Chubbs on Dec 2, 2013 14:47:06 GMT -5
How do you like the element peq16 and mx3 combo?
|
|
|
|
Post by Arch-Angel(3.14) on Dec 2, 2013 14:54:58 GMT -5
Took forever to get and the mount for the dual pressure switch kinda sucks, but other than that - the light and laser are very bright and responsive. Twas worth the money.
|
|
|
|
Post by Chubbs on Dec 2, 2013 16:19:57 GMT -5
I was really contemplating getting the set for my build, then I saw that evike started carrying functional Peq-15's so I hopped all over that. Should have my Peq, surefire repro, Elcan, and other goodies next week! It's going to be some nice eye-candy.
|
|
Rios
Sergeant
Live large or die later
Posts: 377
|
Post by Rios on Dec 4, 2013 19:03:31 GMT -5
Dont know if this is a noob question, but what are the performance differences of the widebore compaired to a tightbore?
|
|
|
|
Post by Chubbs on Dec 4, 2013 19:43:55 GMT -5
Dont know if this is a noob question, but what are the performance differences of the widebore compaired to a tightbore? A widebore allows for more room for the bb to travel down the barrel which helps remove the variable of the bb bouncing off the inner barrel walls as it travels out of the gun. This in turn allows for more consistent back spin on the bb throughout the barrel. Though this may allow for better hop up patterns it can however lower fps which can result in less distance. |
|
|
|
Post by Arch-Angel(3.14) on Dec 5, 2013 10:05:14 GMT -5
What he said is pretty much on point;however, if you have a high powered AEG or gas rifle that outputs a high fps, the widebore won't reduce distance. It will reduce fps, but the distance is unchanged - if not better.
|
|
|
|
Post by Chubbs on Dec 18, 2013 16:21:50 GMT -5
  Sorry for the bad pic. I was in a bit of a hurry when i took the last picture. What once was a G&G raider XL... Externals: Custom cut Madbull dragonfire ris 7" Noveske 7.5" diplomat outer barrel Magpul afg Magpul AAC flash hider Night evolution m951 Matrix peq-15 45 degree mount Matrix auto brightness micro red dot Phantom gear Spectre Dr. magpul XT rail cover Internals: Lonex m100 Gearbox Lonex 16:1 gears Lonex A3 high speed motor Angel 185mm 6.03 Angel v-tooth bucking G&G hop up chamber 16 AWG teflon wired to deans |
|
|
|
Post by maxooolm4guy on Dec 18, 2013 17:28:40 GMT -5
why a shot barrel with a DR?
|
|
)
